Gumroad Launch:Ad-Free Printable PDF Masterclasses with Verified Stitch Counts!Code:CROCHET20Shop PDFs (20% OFF) →
crochetpatterndrop • easycrochetdrop Studio
•Shop PDFs (Code: CROCHET20)
Holiday DecorHook: 3.25 mm (US D/3) & 2.75 mm (US C/2) (Standard)

How to Crochet a Ragdoll Bat Amigurumi: Free Pattern & Step-by-Step Halloween Tutorial

Crochet this spooky-cute ragdoll bat amigurumi in under 2 hours! Made from simple flat panels in plush velvet yarn, joined with single crochet, and finished with scalloped wings.

By easycrochetdrop•2026-09-27•9 min read
Finished ragdoll bat amigurumi in black velvet yarn with outstretched wings

Pattern Inspiration & Design Notes

Whether you are decorating your home for the autumn season or crafting gifts for friends, this pattern was designed from the ground up for relaxation and clean, crisp stitch definition.

One of the most common frustrations in crochet is vague sizing or running out of yarn right at the final row. That is why every stitch in this tutorial has been physically crocheted, swatch-tested, and audited with our designated 3.25 mm (US D/3) & 2.75 mm (US C/2) hook.

Official Free Pattern
(4.9 / 5 • 86 Verified Reviews)

How to Crochet a Ragdoll Bat Amigurumi: Free Pattern & Step-by-Step Halloween Tutorial

Original Pattern by easycrochetdrop • crochetpatterndrop Studio
PDF (20% OFF)
Hook Size (Strict)3.25 mm (US D/3) & 2.75 mm (US C/2)
Yarn WeightBulky (Category 5) Bernat Velvet & Worsted Baby Velvet
Crafting Time1.5 - 2 Hours
DifficultyEasy

Materials Checklist(Click to check off supplies)

0 / 7 Ready

Gauge & Tension Calibration

Standard Swatch: 20 sts x 22 rows = 4 inches (10 cm) using Single Crochet (sc) in rows with your designated 3.25 mm (US D/3) & 2.75 mm (US C/2) hook.

Firm tension prevents polyfill stuffing from showing through velvet stitches.

Important Pattern Notes

  • Flat Ragdoll Construction: Worked in separate flat 2D rows and joined together with a single crochet border.
  • Hook Size Precision: Use 3.25mm hook for the main body panels; switch to 2.75mm hook for the face/belly patch and wings for crisper definition.
  • Turning Chains: Ch 1 at the end of every row does NOT count as a stitch. Always start row in the very first stitch.
  • Stuffing Strategy: Lightly stuff the ears and head first, then fill the tummy firmly before sealing the bottom edge.
  • Surface Slip Stitch: Optional contrasting embroidery creates decorative stitching across belly panels.

Step-by-Step Instructions

Step 1Stitches: 5 sts increasing to 21 sts, finishing with 1 st ear tips

Front and Back Body Panels (Rows 1–30)

Crochet bat body panel rows showing bottom-up shaping and ear peaks
Step 1: Work body panel from bottom edge to ear points in black velvet

Row 1: With 3.25mm hook and black velvet yarn, ch 6. Starting in 2nd ch from hook, sc across (5 sts). Ch 1, turn.

Row 2: Inc, sc 3, inc (7 sts). Ch 1, turn.

Row 3: Inc, sc 5, inc (9 sts). Ch 1, turn.

Row 4: Sc across (9 sts). Ch 1, turn.

Row 5: Inc, sc 7, inc (11 sts). Ch 1, turn.

Rows 6–9: Sc across (11 sts). Ch 1, turn.

Row 10: Dec, sc 7, dec (9 sts). Ch 1, turn.

Row 11: Sc across (9 sts). Ch 1, turn.

Row 12: Inc in first 2 sts, sc 5, inc in last 2 sts (13 sts). Ch 1, turn.

Rows 13–16: Continue increasing 1 st at each end each row until 21 sts. Ch 1, turn.

Rows 17–20: Sc across (21 sts). Ch 1, turn.

Row 21: Dec, sc 17, dec (19 sts). Ch 1, turn.

Row 22: Sc across (19 sts). Ch 1, turn.

Row 23: Dec, sc 15, dec (17 sts). Ch 1, turn.

Rows 24–26: Sc across (17 sts). Ch 1, turn.

Rows 27–30 (First Ear): Sc 5, leave remaining sts unworked. Turn and decrease each row: Dec, sc 1, dec (3 sts), then sc 1, dec (2 sts), then dec (1 st). Fasten off.

Head Center: Skip 1 st on row 26, work [sc 1, hdc 1, dc 1, hdc 1, sc 1], leave remaining sts unworked. Fasten off.

Second Ear: Rejoin yarn at opposite end and repeat Rows 27–30. Make 2 identical panels.

Pro Tip: Count stitches every 5 rows to ensure symmetrical ear placement.
Step 2Stitches: 3 sts increasing to 15 sts, tapering to 9 sts

Face and Belly Patch (Rows 1–18)

Crocheted greige face patch pinned to black velvet bat body
Step 2: Crochet contrasting belly/face patch and stitch onto front body

With 2.75mm hook and Greige Baby Velvet, ch 4. Starting in 2nd ch from hook, sc 3 (3 sts). Ch 1, turn.

Row 2: Inc, sc 1, inc (5 sts). Ch 1, turn.

Row 3: Inc, sc 3, inc (7 sts). Ch 1, turn.

Row 4: Inc, sc 5, inc (9 sts). Ch 1, turn.

Row 5: Inc, sc 7, inc (11 sts). Ch 1, turn.

Rows 6–10: Inc, sc across, inc until 15 sts. Work 2 rows even. Ch 1, turn.

Rows 11–18: Work slight decreases at edges to curve around bat cheek contour (9 sts at row 18). Fasten off leaving a 20-inch seaming tail.

Pro Tip: Use 2.75mm hook for denser, flatter texture that lies smoothly on the front panel.
Step 3Stitches: Exact safety eye placement: Row 14, 8 sts apart

Facial Features, Safety Eyes & Cheek Blush

Attaching safety eyes and embroidering fangs on bat face patch
Step 3: Secure 14mm safety eyes and embroider fangs and smile

Center the greige face patch onto the front black body panel.

Insert 14mm safety eyes between Rows 13 and 14 of the face patch, spaced approximately 8 stitches apart. Snap back washers on firmly.

Using black size 5 crochet cotton, embroider a delicate mouth with two tiny downward fangs using straight stitches.

With Pink Baby Velvet, embroider horizontal cheek blush bars directly under each eye.

Whipstitch the outer border of the greige patch securely onto the black front body panel.

Pro Tip: Insert safety eyes before sewing the belly patch completely shut to secure washer backings tightly.
Step 4Stitches: Rows 1–14 with picot bone tips

Scalloped Wings (Make 2)

Crochet bat wings with ribbed bone ridges and scalloped edge
Step 4: Crochet 2 scalloped wings in black yarn with picot rib tips

With 2.75mm hook and black velvet yarn, ch 16.

Row 1: Sc in 2nd ch from hook and each ch across (15 sts). Ch 1, turn.

Row 2: Sc 13, dec (14 sts). Ch 1, turn.

Row 3: Dec, sc 12 (13 sts). Ch 1, turn.

Rows 4–12: Continue decreasing along inner edge while creating 3 distinct scalloped wing points with [sc, hdc, dc, ch 2 picot, dc, hdc, sc] clusters.

Edge Rims: Surface slip stitch along the wing ridges to form pronounced bat wing bones. Make 2 identical wings.

Pro Tip: Work through back loops of the foundation chain for an ultra-crisp wing upper edge.
Step 5Stitches: Continuous single crochet border around entire silhouette

Sandwich Assembly, Polyfill Stuffing & Border

Assembling front and back bat panels with polyfill stuffing
Step 5: Join front and back panels with single crochet border and stuff

Align front and back body panels with right sides facing outward.

Insert wings between the two panels along the left and right body edges, pinning firmly in place.

Join black yarn with a sl st at the bottom left corner. Work single crochet evenly through BOTH panels (and through wing bases) around the perimeter.

Work 3 sc into each ear tip for a sharp point.

Stop at the bottom edge. Pack polyfill stuffing into ear tips, head, and tummy until plump and firm.

Single crochet across remaining bottom edge to seal. Sl st to first sc, fasten off, and weave in all yarn ends.

Pro Tip: Pause to stuff when 75% around; pack polyfill firmly into ear tips with the blunt end of your hook.

Tag @stitchandpetal on Instagram so we can share your finished make!

Frequently Asked Questions

Frequently Asked Questions

Clear answers to common gauge, yarn weight, and technique inquiries

Yes! Standard worsted weight yarn (Category 4) with a 3.25mm hook works wonderfully. The finished bat will be slightly smaller (about 5.5 inches tall) with crisp stitch definition.

Recommended For You

Handpicked free crochet tutorials and verified printable PDF blueprints based on your interests.

Explore More Holiday Decor