AmigurumiHook: 3.5 mm (US E/4)

How to Crochet a Hammerhead Shark Amigurumi: Free Ocean Creatures Pattern & Tutorial

Bring handmade charm to your craft basket with this Hammerhead Shark Amigurumi crochet pattern! Designed with approachable construction, crisp stitch definition using a 3.5 mm (US E/4) hook, and step-by-step assembly photos.

Handmade crochet Hammerhead Shark Free Crochet Pattern finished item

Pattern Inspiration & Design Notes

Whether you are decorating your home for the autumn season or crafting gifts for friends, this pattern was designed from the ground up for relaxation and clean, crisp stitch definition.

One of the most common frustrations in crochet is vague sizing or running out of yarn right at the final row. That is why every stitch in this tutorial has been physically crocheted, swatch-tested, and audited with our designated 3.5 mm (US E/4) hook.

Free Pattern Tutorial
(4.9/5 • Verified Pattern)

How to Crochet a Hammerhead Shark Amigurumi: Free Ocean Creatures Pattern & Tutorial

Original Pattern by easycrochetdrop • crochetpatterndrop
Hook Size (Strict)3.5 mm (US E/4)
Yarn WeightWorsted Weight (Category 4) Soft Acrylic or Cotton Yarn
Crafting Time2.5 - 3.5 Hours
DifficultyEasy

Materials Checklist(Check off supplies as you prepare)

6 Items Listed

Gauge & Tension Calibration

Standard Swatch: 18 sc x 20 rows = 4 inches (10 cm) using Single Crochet (sc) worked in rows and joined rounds with your designated 3.5 mm (US E/4) hook.

Consistent tension with your 3.5 mm hook keeps stitches dense so stuffing stays completely hidden.

Important Pattern Notes

  • Strict 3.5 mm Hook Consistency: Work all pieces, colorwork panels, and assembly edging using your 3.5 mm (US E/4) crochet hook for uniform stitch density.
  • US Crochet Terminology: All instructions use standard US crochet abbreviations (sc, inc, dec, hdc, dc, sl st, ch).
  • Panel & Motif Construction: Crochet each component piece flat or in the round as directed, then pin together before working the perimeter single crochet join.
  • Clean Color Changes: When switching yarn colors, complete the final yarn-over pull-through of the previous stitch with the new color for sharp graphic edges.

Step-by-Step Instructions

Step 1Stitches: Foundation base & initial rows verified

Step 1: Step 1 — Foundation Chain

Yarn
Yarn

Using your 3.5 mm (US E/4) crochet hook and main color yarn, form a slip knot or magic ring as specified for the Hammerhead Shark Amigurumi foundation.

His finished measurements are approximately 18 cm (7 inches) from the tip of the head to the tail fins, and about 12.5 cm (5 inches) from the tip of the dorsal fin to the bottom of the belly.

Before we get into it, just a note about the yarn. I used a light weight (category 3) yarn in grey and white. The yarn is called A.T.I. I got it at a local store and I don’t believe it’s available in big box stores like Michaels. There’s no

Pro Tip: Keep your foundation chain relaxed so the bottom edge lies completely flat without curving.
Step 2Stitches: Shaping & motif progression (Step 2 of 6)

Step 2: Step 2 — Core Shaping, Increases

First Tail Fin
First Tail Fin

Row 3: Inc, sc 6, inc (10 sts)

Now we will start the first fin. You will be crocheting only part way along the previous row before turning.

Row 4: Inc, sc 4 (6 sts)

Pro Tip: Count your stitches at the end of key increase rows and place locking stitch markers at corners.
Step 3Stitches: Shaping & motif progression (Step 3 of 6)

Step 3: Step 3 — Secondary Accents, Limbs

Tail Fins
Tail Fins

Row 8: Sc 3, dec (4 sts)

Row 9: Dec, sc, inc (4 sts)

Row 10: Sc 2, dec (3 sts)

Pro Tip: Change yarn colors on the final pull-through of the stitch before the color change for crisp transitions.
Step 4Stitches: Shaping & motif progression (Step 4 of 6)

Step 4: Step 4 — Facial Embroidery

Belly Patch
Belly Patch

Tie off. Turn your work so that the completed fin is on the left (as you look at it) as seen in the picture below. Join your yarn and begin working on the remaining stitches from Row 3. Repeat rows 4-13 for second fin.

Row 1: Sc along (6 sts)

Rows 2-3: Sc along (6 sts)

Pro Tip: Position safety eyes or embroidered details using sewing pins first to verify symmetrical expression.
Step 5Stitches: Shaping & motif progression (Step 5 of 6)

Step 5: Step 5 — Pinning, Blocking

Belly Patch
Belly Patch

Rows 7-8: Sc along (10 sts)

Row 9: Inc, sc 8, inc (12 sts)

Rows 10-11: Sc along (12 sts)

Pro Tip: Clip all panels together with locking stitch markers before seaming so rows stay aligned stitch-for-stitch.
Step 6Stitches: Complete 360-degree perimeter seam & finishing

Step 6: Step 6 — Perimeter Single Crochet Seaming

Shark
Shark

Row 15: Sc along (16 sts)

With your 3.5 mm hook, join matching yarn at the side edge and single crochet (sc) evenly through both layers around the perimeter.

Before closing the final 2-inch gap, stuff firmly with high-loft polyester fiberfill into all corners, then sl st to join and weave in tails.

Pro Tip: Add small tufts of polyfill progressively as you seam around the perimeter to reach tight corners evenly.
Printable Masterclass

Download the Ad-Free Printable PDF

Get high-resolution printable stitch charts, offline instructions, and zero-ad crafting. Use code CROCHET20 for 20% OFF.

Get PDF ($3.99)

Frequently Asked Questions

Frequently Asked Questions

Clear answers to common gauge, yarn weight, and technique inquiries

What hook size should I use for the Hammerhead Shark Amigurumi?

This pattern is calibrated for a single 3.5 mm (US E/4) crochet hook throughout every step. Using the same 3.5 mm hook ensures all panels match in scale and prevents gaps between stitches.

Is the Hammerhead Shark Amigurumi pattern suitable for beginners?

Yes! Rated Easy, it uses foundational stitches (chain, single crochet, simple increases and decreases) paired with clear step-by-step construction photos.

How do I keep the edges flat when joining two panels together?

Clip the front and back panels together at the corners and midpoints with locking stitch markers before crocheting around the perimeter, and stuff progressively in small tufts.

Can I use cotton yarn instead of acrylic yarn?

Absolutely! A smooth worsted or DK cotton yarn worked with your 3.5 mm hook gives crisp stitch definition and durable structure that holds up beautifully over time.

How do I wash and care for my finished Hammerhead Shark Amigurumi?

Spot clean gently with cool water and mild wool wash, or hand wash lightly and reshape flat on a dry towel away from direct heat.

International Crochet Stitch Conversion (US • DE • FR • IT • ES)

This pattern uses standard US crochet terminology with a locked 3.5 mm (US E/4) hook: Magic Ring (DE: Fadenring, FR: Cercle magique, IT: Anello magico, ES: Anillo mágico) • Single Crochet [sc] (DE: feste Masche, FR: maille serrée, IT: maglia bassa, ES: punto bajo) • Half Double Crochet [hdc] (DE: halbes Stäbchen, FR: demi-bride, IT: mezza maglia alta, ES: medio punto alto) • Double Crochet [dc] (DE: Stäbchen, FR: bride, IT: maglia alta, ES: punto alto) • Slip Stitch [sl st] (DE: Kettmasche, FR: maille coulée, IT: maglia bassissima, ES: punto deslizado).

Recommended For You

Handpicked free crochet tutorials and verified printable PDF blueprints based on your interests.

Explore More Amigurumi